studs are basically large vertical beams that help make up stud walls, whether they be structural or to partition rooms. Studs can be wood or metal, but wood studs are generally used in ...

You need the solid backing of studs--the vertical 2x4s behind finished walls. Here are some ways to find them: * Most reliable is the high-tech electronic stud finder that detects changes in density.

Dear James: We are building a guest house using wood stud walls. We plan to build the walls on the ground and raise them. What is the easiest method to do this and have nice, flat walls?

Since most walls in a house are built of sturdy vertical 2-by-4 wood supports, called studs, it is imperative that any fastener supporting a heavy mirror, picture, wall shelf or other substantial ...

it’s a good idea to check if there are any wall studs first. These are vertical, structural beams that form the frame of a stud wall and if you can locate them, then you’ll find somewhere ...

How To Find a Stud in Plaster ... After 24 hours, when your wall is stable, remove the washers. Next, use a taping knife to ...

The studs can be flush with the wall or spaced out from the wall, depending on the intended use. For the vertical studs, use 2-by-4s at least 4 inches longer than the height of the joists from the ...

In most post-1960 construction, studs sit 16 inches on-center, leaving 14 ... high level of difficulty for stud finders because the screw heads are only about 0.125 inch below the surface of the wall.

If you’re doing some home renovation work or hanging something up, you’ll need to know where the studs in your walls are. But you don’t need a fancy stud finder device—a magnet will do ...

it's always best to screw or nail directly into a wall stud. Unfortunately, studs are seldom, if ever, positioned exactly where you need them, but that's okay. In most situations you can use a ...